Pressure Transmitters - Michshur Ltd. sells pressure transmitters for every need, including general purpose and high/low pressure. The standard stainless steel connections on these transmitters can be adapted using special materials like ceramic or PVDF to withstand especially corrosive materials. These are highly accurate measurement devices and have been used in well known clean room sites and beverage manufacturing facilities. If the pressure is a problem, Michshur will make sure of the solutions.


 

TYPE MP-710 Series
 
The MP-710 is a series of pressure transmitters. The transmitters are two-wire loop powered with a standard output signal of 4-20 mA proportional to the applied pressure at the input port (pressure input). All wetted parts of the MP-700 are stainless steel and viton seal. The MP-700 series are based on a piezo resistive element, temperature compensated and amplified to achieve a very accurate device with excellent temperature and long term stability.


PDF Download  <
 


 
 
TYPE 40.1001
 

Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids and gases. The pressure transmitter incorporates a thick-film strain gauge as a measuring device. The pressure sensor has an aluminum-oxide (Al2O3) ceramic base material. The pressure is converted into an electrical signal.



PDF Download  <
 


 
 
TYPE 40.1050
 

This differential pressure transmitter measures the pressure in liquid and gaseous media. The difference between the two pressures is converted into an analog output signal. The piezo-resistive silicon sensor is built into a stainless steel housing.



PDF Download  <
 


 
 
TYPE 40.2050
 

Pressure transmitters are used for measuring the relative (gauge) and absolute pressures in liquids and gases. The pressure transmitter operates on the piezo-resistive measuring principle. The pressure is converted into an electrical signal.



PDF Download  <
 


 
 
TYPE 40.4201
 

Pressure and differential pressure switches Type 4 ADS are used to measure vacuum, pressure or differential pressure in HVAC and filter technology, for example. Pressure and differential pressure switches consist essentially of base, diaphragm, intermediate disc, case and protective cover. When used as pressure or vacuum switch, the base and diaphragm with disc form the pressure chamber. When used as a differential pressure switch, the base and a second diaphragm with intermediate disc form the two pressure chambers. A pressure change in the pressure chamber causes an axial displacement of a pin linked to the diaphragm. When the selected switching point is reached, a spring-loaded contact is activated.



PDF Download  <
 


 
 
TYPE 40.4327
 

General application Pressure transmitters are used for evaluating pressures in liquids and gases. The pressure transmitter incorporates a capacitive ceramic sensor. The pressure is converted into an electrical signal.



PDF Download  <
 

 
TYPE 40.4366
 

General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter is a piezo-resistive element or a thin-film strain gauge. The pressure is converted into an electrical signal.



PDF Download  <
 


 
 
TYPE 40.1015
 

General application The level probe type dTRANS p90 is used to measure hydrostatic levels in liquids. It is suitable for very simple applications that do not make any demands on overvoltage protection (lightning protection). Applications include level measurement in wells, boreholes, wastewater plants, vessels, watercourses, ponds and lakes.



PDF Download  <